Products
Home / Products / Omni Directional Wheels /

5 Inch 125mm Anti Static ESD Omni Directional Wheels 150kg Load For Cleanroom Electronics Robot

5 Inch 125mm Anti Static ESD Omni Directional Wheels 150kg Load For Cleanroom Electronics Robot

Brand Name: QIANSU
Model Number: QST0125
MOQ: 1 Set (4 Pieces)
Price: Negotiable
Payment Terms: T/T,L/C,PayPal,Western Union
Supply Ability: 1500 Sets per Month
Detail Information
Place of Origin:
Hangzhou, Zhejiang, China
Certification:
CO
Model:
QST0125
Wheel Diameter:
125mm (5 Inch)
Overall Width:
45mm
Roller Count:
10 Pcs
Roller Compound:
Carbon Loaded Conductive PU
Surface Resistance:
10^5 To 10^7 Ohm
Static Decay:
1000V To 100V Under 0.4s
Reference Standard:
IEC 61340-5-1
Hub Finish:
Black Anodized Aluminum
Load Per Wheel:
37.5kg
Axle Bore:
12mm Plain Bore
Mass:
1.4kg Per Wheel
Batch Report:
Resistance Report Supplied Per Lot
Packaging Details:
Each wheel in anti-static bag, four wheels per carton, cartons strapped on export pallet
Highlight:

Anti Static ESD Omni Wheel

,

Conductive Polyurethane Roller

,

Cleanroom Robot Caster

Product Description

Anti Static ESD Omni Wheels for Electronics and Cleanroom Robots

Background: ESD audit pressure on US and European electronics plants

Contract manufacturers supplying automotive electronics, medical devices and data centre hardware are audited against ANSI/ESD S20.20 in North America and IEC 61340-5-1 in Europe, and the audit scope now follows the material handling equipment into the EPA, not just the workbench. A trolley wheel that generates charge while rolling becomes a finding. Plants in Texas, Bavaria, Penang and Guadalajara that have already grounded their floors and ionised their stations still fail resistance checks on the cart itself, because standard polyurethane rollers are insulators. This wheel exists to close that gap: it is a drop in replacement for the 125 mm casters already on your line trolleys, with a documented resistance class you can hand to the auditor.

Static discharge is the hidden failure mode on semiconductor lines and printed circuit board assembly floors. A standard polyurethane roller on a conveyor caster may accumulate several kilovolts as it rolls, and that charge finds its way into the board or the sensor stack. The QST0125 was developed for exactly this problem: conductive carbon loaded polyurethane is bonded to a black anodized aluminum hub, and every roller is electrically tied to the axle through a graphite brush contact, so accumulated charge drains to the frame instead of jumping to the product.

Electrical performance measured on production samples

Surface resistance105 to 107 Ohm, conductive grade
Volume resistanceBelow 106 Ohm cm
Static decayFrom 1000 V to 100 V in under 0.4 s
Reference standardIEC 61340-5-1, ANSI ESD S20.20 practice
Charge generationBelow 30 V after 60 s rolling test

Mechanical data

ModelQST0125
Outer diameter125 mm (5 inch)
Overall width45 mm
Roller count10 pcs per wheel
Hub finishBlack anodized, matte
Load rating37.5 kg per wheel / 150 kg per set of four
Axle bore12 mm, plain bore
Mass1.4 kg per wheel

Where floor managers install this wheel

SMT line material trolleys, wafer cassette transfer carts, hard drive assembly cells, battery module handling fixtures, and any mobile platform that runs inside an EPA controlled area where triboelectric charging is a documented risk.

Ordering choices

Choose plain bore for through axle mounting, or add a machined keyway for driven applications. Rubber tyres in the same conductive compound are available if your platform mixes omni wheels with standard casters and you need the whole vehicle to hold one resistance class. Wheels are delivered in anti-static bagging with a measurement report for each production batch.

Documentation and delivery for audited sites

Each production lot ships with a resistance measurement table that references the test method, so your EHS team can file it with the ESD control plan. Wheels travel in anti-static bagging inside a moisture barrier carton, and cases are ISPM 15 marked for US and EU import. We quote FOB Ningbo, CIF to your nearest port, or DDP to the plant gate, and can hold consignment stock for repeat programmes.

Tell us the resistance class your audit requires and the caster size on your existing trolleys, and we will confirm a matching part and send a sample set of four for verification on site.