Products
Home / Products / Omni Directional Wheels /

6 Inch 152mm Hard Anodized Aluminum Washdown Omni Directional Wheel 300kg Capacity For Food Processing AGV

6 Inch 152mm Hard Anodized Aluminum Washdown Omni Directional Wheel 300kg Capacity For Food Processing AGV

Brand Name: QIANSU
Model Number: QST0152A
MOQ: 1 Set (4 Pieces)
Price: Negotiable
Payment Terms: 30% T/T in advance, 70% before shipment
Supply Ability: 800 Sets per Month
Detail Information
Place of Origin:
Hangzhou, Zhejiang, China
Certification:
CO
Model:
QST0152A
Wheel Diameter:
152mm (6 Inch)
Face Width:
50mm
Roller Count:
10 Pcs
Roller Material:
White Food Grade PU, 88 Shore A
Hub Material:
6061-T6 Aluminum Billet
Surface Treatment:
Hard Coat Anodized, 50 Micron
Fasteners:
A4 Stainless Steel
Sealing:
Shrouded Cavity With Silicone O Ring
Ingress Protection:
IP66
Load Per Wheel:
75kg
Shaft Hole:
20mm H7
Weight:
2.1kg Per Wheel
Cleaning Chemistry:
PH 5 To 9, Hypochlorite Up To 100 Ppm
Food Contact Declaration:
FDA 21 CFR 177.2600 And EU 10/2011
Cleaning Temperature:
Up To 90 C Rinse
Packaging Details:
Individual PE sleeve per wheel, 4 wheels per moisture barrier carton, palletized for sea freight
Highlight:

Anodized Aluminum Washdown Wheel

,

Food Grade PU Rollers

,

IP66 Hygienic Caster

Product Description

6 Inch 152mm Hard Anodized Aluminum Washdown Omni Wheel

Background: hygiene audits in North American and European food plants

Food and pharmaceutical plants in the US and EU are inspected against different rulebooks, but they ask the same question about mobile equipment: can it be cleaned, and can you prove what it is made of. USDA and FDA inspectors in the US, and customers auditing to EU Regulation 1935/2004 and EHEDG guidance in Europe, both expect food contact surfaces that do not harbour residue and do not corrode under daily sanitiser exposure. Bare aluminium omni wheels fail within a season of washdown because the untreated surface pits and the roller cavity traps residue. This wheel keeps the aluminium hub but changes the surface treatment and the sealing strategy, which is the combination most European and US integrators actually specify for pH 5 to 9 cleaning chemistry, at roughly two thirds of the weight and cost of a stainless hub.

Hygienic design decisions on the aluminium version

  • Hub machined from 6061-T6 aluminium billet, then hard coat anodized to 50 µm, so the surface is electrically insulating, abrasion resistant and does not chalk under detergent contact.
  • Roller cavity fully shrouded with a silicone O ring on the inner face, which keeps rinse water out of the bearing pocket under hose pressure.
  • Open roller gaps of 3 mm minimum, so rinse water and residue leave the wheel instead of collecting behind the rollers.
  • Stainless A4 fasteners throughout, isolating the aluminium hub from galvanic attack at the screw threads.
  • White non marking food grade tread compound, free of silicone and phthalate plasticizers, safe for direct product zone contact.
  • 2.1 kg per wheel, about a third lighter than the stainless equivalent, which matters on cart frames that are already at their weight limit for manual handling rules.

Cleaning chemistry this wheel is specified for

Compatible with quaternary ammonium sanitisers, diluted peracetic acid up to 0.2%, alkaline foam cleaners up to pH 9, and short contact with sodium hypochlorite up to 100 ppm. Not recommended for continuous caustic CIP above 1% at 60 °C, or sustained hypochlorite above 200 ppm, where the anodic layer is consumed. If your line runs caustic CIP, tell us at quotation stage and we will quote the stainless hub version instead.

Technical data

ModelQST0152A
Diameter152 mm (6 inch)
Face width50 mm
Rollers10 pcs, white food grade PU 88 Shore A
Hub6061-T6 aluminium, hard coat anodized 50 µm
FastenersA4 stainless steel
SealingShrouded cavity with silicone O ring
Ingress ratingIP66
Capacity75 kg per wheel / 300 kg per set of 4
Shaft hole20 mm H7
Weight2.1 kg per wheel
ColourBlack or clear anodized, white rollers

Where it is specified

Ready meal tray transport, bakery rack movers, beverage changeover carts, pharmaceutical dispensing booths, and seafood processing platforms that are hosed down at the end of each shift with neutral or mildly alkaline sanitisers.

Export supply for regulated food projects

We issue a declaration of food contact compliance referencing FDA 21 CFR 177.2600 and EU 10/2011, an anodizing thickness report, and an English cleaning recommendation sheet for your HACCP file. Crates are ISPM 15 heat treated and lined, so the shipment clears US and EU customs without fumigation delay. Standard terms are FOB Ningbo or CIF to Rotterdam or Savannah, with production scheduled against your line installation date.

Share the cleaning chemistry, rinse temperature and cart frame drawing, and we will confirm whether the anodized aluminium version or the stainless hub version is the right fit for your line, within two working days.