| Brand Name: | QIANSU |
| Model Number: | QST0203D |
| MOQ: | 1 Set (2 Modules) |
| Price: | Negotiable |
| Payment Terms: | 30% T/T in advance, 70% before shipment |
| Supply Ability: | 500 Modules per Month |
European AMR builders assembling in Poland, Hungary and Italy, and US integrators deploying into grocery and parcel hubs, keep hitting the same engineering trade off: buying separate wheels, gearboxes, motors and encoders gives flexibility on paper but adds assembly time, backlash stack up and supplier management. The alternative, a proprietary drive unit, locks the platform to one vendor for years. This module is positioned between the two: a standard omni wheel envelope with a documented gearbox, servo and encoder inside, so a programme can move from prototype to a 200 unit fleet without redesigning the corner of the chassis. It is supplied with driver parameters and a commissioning sheet, which is what usually shortens the first field install to a single shift.
Most omni platforms are assembled from separate wheels, motors, gearboxes and encoders, and each joint in that chain adds backlash, alignment error and assembly labour. The QST0203D packages the wheel, a planetary gearbox, a brushless servo and a 2500 line encoder into one sealed unit with a single cable and a single mounting flange. The result is a drop in drive unit that a technician can fit with four bolts, without shimming or belt tensioning.
| Item | Option A | Option B |
|---|---|---|
| Servo power | 400 W | 750 W |
| Gear ratio | 1:10 | 1:20 |
| Rated torque at wheel | 18 N.m | 34 N.m |
| Top travel speed | 1.5 m/s | 0.9 m/s |
| Continuous load | 400 kg per module | 400 kg per module |
| Encoder | 2500 line incremental | 2500 line incremental plus hall |
| Model | QST0203D |
| Wheel diameter | 203 mm (8 inch) |
| Rollers | 12 pcs PU 92 Shore A |
| Gearbox backlash | Below 15 arcmin |
| Brake | 24 V spring applied, 6 N.m holding |
| Supply voltage | 48 V DC nominal, 36 to 60 V range |
| Feedback | Incremental encoder plus hall sensors |
| Communication | CANopen, RS485 or pulse direction |
| Ingress rating | IP54, IP65 on request |
| Module mass | 11.8 kg |
Mount the module with the cable exit facing the vehicle centreline; the cable gland is not rated for continuous immersion. Set the drive current limit to 1.3 times rated before the first teach run, because a fresh PU roller has slightly more grip than a run in roller and a naive tuning can trip the overcurrent protection during a sharp sideways move. Absolute positioning is possible by homing on the index pulse once per shift.
One assembled drive module, a 3 m shielded power and signal cable, a mounting bolt kit, and a commissioning sheet with the encoder zero offset for that specific unit. Matching driver parameters for common controllers can be provided as a file.
Modules are shipped with CE related documentation, a declaration of incorporation for machinery integration, an English commissioning sheet and a 3 m shielded cable assembly. Crates are ISPM 15 marked and can be consolidated with spare modules for your service depot. We quote FOB Ningbo, CIF to Rotterdam, Hamburg or Long Beach, or DDP to your assembly plant, and can hold buffer stock once a fleet programme is running.
Send the platform mass, target acceleration, floor gradient and controller type, and our engineering team will return a sizing proposal with a recommended gear ratio and torque figure within three working days.